Flightstick Dust Cover

Es handelt sich um eine Gute Abdeckung, die den Stick gut vor Staub schütz.
Noch besser wäre das Cover nur, wenn es auch die Base mit abdecken würde.

It's a good cover that protects the stick from dust. Only thing that would be even better if the cover would also protect the base.

Just a cover, but very necessary when the sim is not being used. Proper quality stitching and cool embroidered logo. The only thing I miss on these is a nice "Remove Before Flight" banner like in the real aeroplanes. I modified mine to attach one :)

I wanted the real covers from Virpil. Excellent material, look, fit and price. Been buying from them since 2020. Never had an issue and they are very quick with any questions. Love this cover.

Very good cover however needs some padding inside, specifically at the bottom. Thats the reason for 4 out of 5 stars.

Starting off, if I could give the stars out in percentages, it would be higher rated.
I also purchased the throttle and its dust cover, which covers everything, leaving space in the back of cover for the attachment connectors.
That is the detail I was expecting for the stick as well, cover the entire part down to the communications connector, but it did not, and leaves a small gap between the stick and the base even.
As someone else posted before, sewing on a silk handkerchief just to have it cover up that smidge more, just 1 more inch of material would have been enough to cover the base down to a satisfactorio level by the connector port.
I feel like this is also meant to be a carry baa though, given that it holds the entire stick alone. So it has it's merits, and it covers it very well, I am sure it will last a long time.

E gia il secondo prodotto che acquisto da loro...Che dire gia dalle foto si vedeva l elevata qualità di gamma che hanno, complimenti per tutto SODDISFATISSIMO TOP TOP!!

Does the job very well.
Covers the main flight stick, but as others have said not the flat base.
I also have an optional axis attached - but the cover can’t accommodate that.
Keeps the dust away from the main stick so I’m happy.

I will be sewing a silk handkerchief to the bottom so it also covers the base but it will do a great job of keeping the grip dust free. Looks great

Don't forget to buy one with your flight stick or sticks. Like I did. Best dust cover for virpil don't bother with inferior covers.

The Virpil flight stick cover is an exceptional accessory that truly enhances the overall experience. The craftsmanship and attention to detail are immediately noticeable, showcasing top-tier quality materials that feel durable and premium. The fit is impeccable, contouring perfectly to the stick for a seamless protection from dust. Overall, this cover is a must-have for anyone looking to upgrade and protect their flight sim setup with a high-quality, perfectly fitting accessory.

Good quality materials and nice strap for tightening it around the base of the stick. It doesn't cover the base, but is a good fit and easy to put over the stick itself.

Got these with my WarBRD-D and Alpha Prime HOSAS.

Fits very good over the stick, but doesn't include the base.

Also fits the left stick with the Z-Extension.

Yes, they could be bigger but I understand, that finding a sweet spot for so many different grips and bases is a bit difficult.

I'm happy I got them, the embroidered Logo looks great on my desk.

Its a great, high quality, cover. But as other reviews have mentioned it would be even better if it was a bit bigger so it would also cover the base

These are nicely made and do what they need to. I know some others have concerns about protecting the base which is understandable but in my opinion the base is way easier to keep clean. The sticks are my main concern because not only would dirt and dust get under the buttons and such, but they would become a chore to clean later on. The base, and again in my opinion, is a simple wipe down and maybe a Q-Tip or two. I agree it would be nice if it covered both, but I knew what I was getting when I purchased my flight stick dust covers and I knew what it would and wouldn't protect.

It protects the Grip from Dust not the Base

Well made, fits perfectly. Love the embroidered logo

So i love how these keep the grips of my constellation Alpha prime dust free. They fit perfectly. With the Z extension on my left grip it still sits over the grip.
Well made good stitching and will likely last for some time.

The reason for 4 stars not 5 is due to my own personal opinion,
I wish these would be bigger or other covers made to cover the grip and the base units so both grips and bases are protected

It’s more than enough to keep the flightstick clean from dust buildup and still protects a little bit of the base, with no extensions.
Does it fit the UH60 grip? A full length collective + grip would be most welcome.

La calidad y diseño ok. Sin embargo se queda corta y malamente solo cubre el joystick. La base queda expuesta. No la devuelvo x q no puedo que si no...

---------- Response from VIRPIL Controls

Hi Fernando! The dust cover is only intended to cover the grip. Due to the ability to equip different extensions in different setups etc, it would not be possible to have a dust cover that covers the entire controller.

Like other reviewers have said. The dust cover is too short to cover the base. It only covers the stick itself and no more. This is a real shame.

In my mind I thought these would be bigger, I definitely did not see the size under more details (125x250 mm). They will only cover the length of your flight stick and not the base.

I have a table mount from MT and I would have liked that these dust covers covered parts of the mount as well, because that gets very dusty as well.

Other than that the quality is fine, it is nothing special but will keep the stick free of dust. If you are looking for something that covers the stick, base and perhaps a mount, it would be better to find something else.

Virpil could you state in the description that this only covers the stick and not the base. You should really add a picture of the cover on a stick and base just to avoid any confusion.

Every single stick is going to go on a base, which is where the dust falls, and accumulates.

These do nothing to cover the adjustment bolts and/or places where dust can get into your expensive base.

I don't know what to do now...I'll have to go try to find longer ones or do something to cover my base while these are on the joysticks

Every single stick is going to go on a base, which is where the dust falls, and accumulates.

These do nothing to cover the adjustment bolts and/or places where dust can get into your expensive base.

I don't know what to do now...I'll have to go try to find longer ones or do something to cover my base while these are on the joysticks

I love it. It's simple, it fits properly, it keeps the dust off my Grips.

The covers do not have a lining, they are made only for a joystick, for example Alpha. Covers should be wider and longer to cover at least half of the WarBRD base with the joystick attached. The logo is nice, but for the rest, it's not good for a premium brand.
I have a set but I do not use it, I bought a set made of neoprene.

Protects your stick not only from dust, but also from occasional beer spill. Easy to wash. I also think it's waterproof. If it is, Virpil should mention it in product description!